Whole House Water Filters for Iron Whole House Well Water Filters for Hydrogen Sulfide (Rotten Egg Smell)

Home High Flow Systems Chlorine Lead Std Systems Chlorine Lead Iron Whole House Chloramine Systems Well Water Systems Iron & Odor UltraViolet Systems for Bacteria pH Systems for Acidic Water Hot Water Housings & Filters Large Capacity Water Softeners Sediment Housings 10" & 20" 4.5" x 20"  Carbon Filters 2.5" x 10" Carbon Filters 2.5" x 10" & 20" Sediment Filters Large Undersink & 4.5" x 10" Filters O-rings Brackets Wrenches Privacy Policy Return Policy Favorite Links

MG20 Iron and Hydrogen Sulfide System.  Two Cubic Foot of filter media in a 12" x 48" tank.  High Quality* water at 5.5 GPM. Water with a pH lower than 6.5 will cause the system to operate at less than 100%.  A pH adjusting filter will be required.  pH systems page. Larger systems for large families or very high iron are also available. 2.5,  3.5 and 4 cubic foot systems are also available for homes requiring flow rates 6.5 GPM and up. Read Systems Specification Sheet. Read Water Quality Definitions* To properly recommend a system we need to know the Iron and pH levels of your water.  To help you in this regard we are offering an iron and pH test kit for $.50 plus postage. Click on the button below to order. 1.5 cu. ft system 2 cu. ft. system 2.5 cu. ft. system 3 cu. ft. system 4 cu. ft. system

Click on picture to enlarge   Fleck 2510 Mechanical Timer Call 1-800-884-0560 for detailed information about this system. We recommend a water test before purchasing any system.  Call us to discuss your water and how we can provide you with a system for clean, safe water. 1-800-884-0560

Close up of Fleck 2510 Timer (cover off) Legend: A is 24 hour clock B is 12 day timer C is inlet port D is outlet port E is back flush port

MG15 system: 1.5 cubic foot media, 10" x 54 " tank, Fleck 2510 timer, potassium feed tank, 3.5 GPM High Quality Water*. Price $719.00

MG20 system: 2 cubic foot media, 12" x 48" tank, Fleck 2510 timer, potassium feed tank, 5.5 GPM High Quality Water*.  Price $825.00

MG25 system: 2.5 cubic foot media, 13" x 54" tank, Fleck 2510 timer, potassium feed tank, 6.5 GPM High Quality Water*.  Price $929.00

MG30 system: 3.0 cubic foot media, 14" x 65" tank, Fleck 2510 timer, potassium feed tank, 7.0  GPM High Quality Water*.  Price $1152.00

MG40 system: 4.0 cubic foot media, 16" x 65" tank, Fleck 2510 timer, potassium feed tank, High Capacity for iron greater than 15 ppm.          Price $1282.00

Low water pressure systems are also available at no additional costs.     Call for details.

• All systems include a bypass valve, male threaded yoke, potassium feed line and a backwash water line. 
•  All water lines are tagged as to inlet, outlet, potassium feed and backwash. 
• Timer operations manual and installation instructions are included.

System Performance Specifications:

1. Iron  and Manganese removal up to 15 ppm.

2. Hydrogen Sulfide removal up to 5 ppm.

3. Flow rate up to 5.5 gpm High Quality* water for iron removal spec., actual flow depends on your systems pressure and demands. 

4. *See Water Quality Definitions for comparisons.

Physical Specifications MG20:

Tank: 12 inch Diameter  X  48 inch tall fiberglass with poly lining.

Media: Two Cubic Feet Manganese Greensand.

Timer: Fleck 2510

1. 12 day mechanical operation.

2.  110 volt AC with grounded three prong plug.

3. 3/4 inch threaded inlet / outlet

4. Bypass valve included.

5. Male thread stub out connector included.

6. Timer cover.

7. John Guest fittings on feed and backwash lines  (no leak,  push and lock seals).

8. Instruction manual.

Potassium Permanganate Feed Tank: 10 inch x 16 inch poly tank with factory calibrated float and media support grid.

Warranty:

Tank: 10 years in residential service.

Timer: 5 years in residential service

Manganese Greensand: Two percent attrition rate per year

Back to Top of Page
 

Water Quality Definitions for comparisons to system water quality and flow rates.

Utility Quality:

• Flow rates listed are at peak design. Operation at higher flow rates not recommended.
• Satisfactory water quality
• Shorter on line time.
• Recommended for influent suspended solids loads less than 150 ppm.

High Quality

• Well suited for many filtering applications
• Very good water quality
• Moderate time on line between backwashing
• Increased pressure loss
• Recommended for influent suspended solids loads less than 300 ppm.

Excellent Quality

• Recommended for most filtering applications under all operating conditions.
• Best Quality water; Maximum particle removal.
• Maximum time on line between backwashing.
• Lowest pressure loss.
• Recommended for influent suspended solids loads up to and greater than 300 ppm.

Green Sand Back Wash System for Iron, Hydrogen Sulfide and Manganese.   

Flow Rates for High Quality* Water:

• Model MG15 = 3.5 GPM
• Model MG20 = 5.5 GPM
• Model MG25 = 6.5 GPM
• Model MG30 = 7.0 GPM

Back to top of page

Filters4h2o US LLC 5750 Graham Lane Owensboro, KY 42303

Email: Filter4h2o@aol.com     Phone: 1-800-884-0560